PRIMARY LOGO
The RCC primary logo is the preferred logo structure and should be the first consideration when placing the logo into documents and design.
ALTERNATE LOGO
The RCC alternate logo is for use only when space does not allow the preferred logo to be of sufficient legible width and size. Always attempt to use the primary logo first
LOGO COLORS
The RCC blue and green use specific color formulas to consistently reproduce properly. The CMYK and RGB formulas have been customized. When creating a document or design that incorporates the blue or green, always use the CMYK and RGB percentages shown above. Avoid allowing software make color conversions.
LOGO COLOR CONFIGURATIONS:
2 COLORS:
The 2 color configuration is the preferred use and is available in PMS for spot color printing, CMYK for printing on press or color copiers, and RGB for digital applications.
1 COLOR:
The 1 color configuration is the logo entirely in blue. Use the 1 color logo only in rare instances when printing is limited to a single color.
BLACK AND WHITE:
The BW configuration is the logo entirely in black. Use when color reproduction is not available or when contrast in documents or design conflict with legibility of the color logo.
REVERSE:
The reverse configuration is the logo entirely in white. The reverse logo is useful when placing against dark backgrounds or photos.
FILE FORMATS:
Both the primary and alternate RCC logos are available in the following formats:
EPS VECTOR (preferred format for high-end printing)
JPEG
PNG
SVG
TIFF
NOTE: Depending upon color configuration, the logos may not be available in a specific format. Example: The reverse logo is not available in JPEG since it would reproduce as a white logo against a white square.
**You can request a copy of the files or font by opening a help desk ticket in the support.robeson.edu portal.
Attached is a copy of the Logo Quick Reference in .pdf format